To model a side-walk stay you will need to follow these steps:
Adding a Stay and Opening the Stay-Pole Construction Library
1. Select the pole you would like to attach your stay to and navigate to the properties tab
2. Select "Structure" in the properties tab
3. Select "Add Opposing Stay"
4. Select the Stay to populate the properties tab with the stay properties
5. Select "Default Stay Attachment" to open up the stay pole construction library
Creating and Using your Side-Walk Stay
Before you create your side-walk stay make sure to create the relevant components in the component library. You will need a cross-arm and a brace.
1. Select "Default Stay Attachment"
2. Make a copy of the construction and name it accordingly
3. Select "Add New Crossarm" and attach a left or right brace
4. Select the Blue Arrow next to your brace selection to flip the positioning vertically
5. Set the Vertical offset to situate it from a fixed distance from the top of the pole
Note: you can also select the sides in which you want the cross-arm attached to by select X -X 0 Y -Y.
6. Set the insulator attachment offset so that the stay cable is attached to the end of the cross arm
7. Select "Save" and then click "Use"
8. Select the stay and set the offset to 0m to make it vertical